Mid Accessories
Download the catalog
Don't forget to download the general catalog to get all the information you need!
1150
Air separator device in stainless steel AISI 303 for pneumatic pumps with automatic pump stop (stopping the pump as soon as air is sucked into the suction line due to an empty drum or tank).
Additional information
| Material | |
|---|---|
| Flow range | |
| Working pressure | |
| IN - OUT Connections | |
| Connection air discharge | |
| Weight | |
| Dimensions (W-P-H) (mm) |
1151
Same as art.no. 1150, but for the use with electric 12 VDC and 230 VAC pumps.
Additional information
| Material | |
|---|---|
| Flow range | |
| Working pressure | |
| IN - OUT Connections | |
| Connection air discharge | |
| Weight | |
| Dimensions (W-P-H) (mm) |
2050
Air separator device for pneumatic pumps.
Additional information
| Flow range | |
|---|---|
| Working pressure | |
| IN - OUT Connections | |
| Connection air discharge | |
| Weight | |
| Dimensions (W-P-H) (mm) | |
| Mat. |
2051
Air separator device for pneumatic pumps with automatic pump stop (stopping the pump as soon as air is sucked into the suction line due to an empty drum or tank).
Additional information
| Flow range | |
|---|---|
| Working pressure | |
| IN - OUT Connections | |
| Connection air discharge | |
| Weight | |
| Dimensions (W-P-H) (mm) | |
| Mat. |
2054
Air separator device for electric 230 VAC pumps with pressure switch and automatic pump stop (stopping the pump as soon as air is sucked into the suction line due to an empty drum or tank).
Additional information
| Flow range | |
|---|---|
| Working pressure | |
| IN - OUT Connections | |
| Connection air discharge | |
| Weight | |
| Dimensions (W-P-H) (mm) | |
| Mat. |
2054-1
Air elimination device suitable for 230 VAC electric pumps.
Additional information
| Flow range | |
|---|---|
| Working pressure | |
| IN - OUT Connections | |
| Connection air discharge | |
| Weight | |
| Dimensions (W-P-H) (mm) | |
| Mat. |
2250
Pulsation damper suitable for the use with 1:1 – and 3:1 – pneumatic pumps. By installing the pulsation damper at the fluid outlet of a pump pressure peaks caused by the function of the pneumatic pump can be damped and thus a constant oil flow can be achieved.
Additional information
| Flow range | |
|---|---|
| Working pressure | |
| IN - OUT Connections | |
| Connection air discharge | |
| Weight | |
| Dimensions (W-P-H) (mm) | |
| Mat. |
4380
Trolley with 2 wheels and two castors, standard version, suitable for 208 l – drums.
Additional information
4389
Trolley with 2 special rubber wheels and 2 rubber castors with brakes, heavy duty
version, provided for the use on rough surfaces, including spill containment base with steel grate.
Additional information
8525
Mounting shelves consisting of spill containment pallets, series Tank Service Base, and special mounting racks for equipment. These units are used:
– to create lubrication units according to the individual requirements;
– to achieve autonomous units that can easily be transported with a pallet truck or forklift and can be put at any place of a workshop;
– to avoid the pollution of the surrounding environment in case of eventual leakages, thanks to the included spill containment pallet.
Additional information
| Weight | |
|---|---|
| Dimensions (W-P-H) (mm) |
8533
Mounting shelves consisting of spill containment pallets, series Tank Service Base, and special mounting racks for equipment. These units are used:
– to create lubrication units according to the individual requirements;
– to achieve autonomous units that can easily be transported with a pallet truck or forklift and can be put at any place of a workshop;
– to avoid the pollution of the surrounding environment in case of eventual leakages, thanks to the included spill containment pallet.
Additional information
| Weight | |
|---|---|
| Dimensions (W-P-H) (mm) |
9016
Automatic rewind, spring-driven hose reel, standard series, in painted steel or in stainless steel AISI 304, suitable for hoses of max 20 m length (ø hose 1/2”) or max 25 m length (ø hose 3/8”). The wetted parts of the painted steel models on demand can also be replaced by stainless steel parts (see pages 217 – 218). The hose reel is supplied without hoses and can be used with hoses for the supply of oils, antifreeze, grease, compressed air and water. Please see catalogue pages 220 and 221 for the selection of the required hoses. On demand the hose reels can also be supplied with a spring brake kit (see information at the end of this page!); please add suffix “/HB” to the article number (f. ex. 9016/HB)!
Additional information
| Material | |
|---|---|
| Pressure | |
| IN - OUT Connections | |
| Internal diameter inlet swivel joint | |
| Diameter hose | |
| Length hose | |
| Suitable pivoting wall bracket | |
| Included swivel joint | |
| Dimensions (A-B-C) (mm) | |
| Spool width (D) | |
| Weight | |
| Series | Standard Series Max Ø 1/2” – up to 20 m Max Ø 3/8” – up to 25 m |
| Rewinding |
9074
Automatic rewind, spring-driven hose reel, adjustable arms series, in painted steel or in stainless steel AISI 304, suitable for hoses of max 40 m length (ø hose max.1/2”). The hose reel is supplied without hoses and can be used with hoses for the supply of oils, antifreeze, grease, compressed air and water. The wetted parts of the painted steel models on demand can also be replaced by stainless steel parts (see pages 216-218). Please see catalogue pages 220 and 221 for the selection of the required hoses.
Additional information
| Material | |
|---|---|
| Pressure | |
| Diameter hose | |
| Length hose | |
| IN - OUT Connections | |
| Internal diameter inlet swivel joint | |
| Suitable pivoting wall bracket | |
| Included swivel joint | |
| Dimensions (A-B-C) (mm) | |
| Spool width (D) | |
| Weight | |
| Rewinding |
9090
Automatic rewind, spring-driven hose reel, adjustable arms series, in painted steel or in stainless steel AISI 304, suitable for hoses of max 25 m length and max diameter of 1/2”. The hose reel is supplied without hoses and can be used with hoses for the supply of oils, antifreeze, grease, compressed air and water. The wetted parts of the painted steel models on demand can also be replaced by stainless steel parts (see pages 216-218). Please see catalogue pages 220 and 221 for the selection of the required hoses.
Additional information
| Material | |
|---|---|
| Pressure | |
| Diameter hose | |
| Length hose | |
| IN - OUT Connections | |
| Internal diameter inlet swivel joint | |
| Suitable pivoting wall bracket | |
| Included swivel joint | |
| Dimensions (A-B-C) (mm) | |
| Spool width (D) | |
| Weight | |
| Series | |
| Rewinding |
AF4219200
Automatic rewind, spring-driven hose reels
Additional information
| Material | |
|---|---|
| Pressure | |
| Diameter hose | |
| Length hose | |
| IN - OUT Connections | |
| Spring Development | |
| Swivel bracket | |
| Included swivel joint | |
| Model | |
| Rewinding | |
| Dimensions (A-B-C) (mm) |
AF4219200
Automatic rewind, spring-driven hose reels
Additional information
| Material | |
|---|---|
| Pressure | |
| Diameter hose | |
| Length hose | |
| IN - OUT Connections | |
| Spring Development | |
| Swivel bracket | |
| Included swivel joint | |
| Model | |
| Rewinding | |
| Dimensions (A-B-C) (mm) |
Quality and maximum performance
VERSATILITY WITHOUT BORDERS
Serving a wide range of industries
FLEXBIMEC equipment is used in repair shops for cars, industrial vehicles, operating machinery, agricultural machinery, motorcycles, auto dealerships, mechanical industries, car washes, and boating.