Level Gauges For Oil

The level gauges of series PUMPSTOP are suitable for the use with all pneumatic oil pumps. They stop the pump when the oil in a container is going to run out and like that prevent air to enter into the system which would create a mixture of oil and air that would cause wrong measurement results of the connected flow meters.
The kit is composed of a probe with level sensor, a solenoid valve for the shut-off of the compressed air, a transformer / stabilizer for the power supply and a warning light with horn (for art. 8951, 8953). The probe is inserted into a drum through its 3/4” – opening and is also fixed there (in case of tanks using a suitable 3/4” – 2” adapter). When the minimum oil level is reached, an electric impulse is transmitted to the solenoid actuated shut-off valve which interrupts the compressed air supply, stops immediately the pneumatic oil pump and activates an acoustical and optical alarm.

PUMPSTOP Low level pump stop kit

Art. 8950

PUMPSTOP
Low level pump stop kit, composed of:
– level probe, suitable for the use in 208 l – drums and 1000 l – IBC – tanks, length 1200 mm, art. no. 8908;
– ON-OFF switch;
– bypass push button which allows to continue the oil flow again after it has been stopped;
– solenoid-actuated shut-off valve for the compressed air, art. no. 7362;
– transformer / stabilizer 230 VAC – 24 VDC, art. no. 6528;
– electric connection cable, length 2 m.

PUMPSTOP Low level pump stop kit

Art. 8951

PUMPSTOP
Low level pump stop kit, composed of:
– level probe, suitable for the use in 208 l drums and 1000 l – IBC tanks, length 1200 mm, art. no. 8908;
– ON-OFF switch;
– warning light with horn, art. no. 8920;
– bypass push button which allows to continue the oil flow again after it has been stopped;
– solenoid-actuated shut-off valve for the compressed air, art. no. 7362;
– transformer / stabilizer 230 VAC – 24 VDC, art. no. 6528;
– electric connection cable, length 2 m.

Art. 8953 Kit as Art. 8951 but with double sensor for indication of reserve and stop level Art. 8909

Overfill protection kit for waste oil

Art. 8307

Overfill protection kit for waste oil, stops the oil flow immediately when the maximum filling level in a tank has been reached.
The kit is composed of:
– high level probe, with connection 3/4” BSP (M) and length 300 mm, art. no. 8905;
– warning light with horn, art. no. 8920;
– solenoid-actuated oil flow shut-off valve, with connection 1” BSP (M), art. no. 7365;
– electronic control switch;
– transformer / stabilizer 230 VAC – 24 VDC, art. no. 6528.

Overfill protection kit for waste oil

Art. 8309

Overfill protection kit for waste oil, stops the oil flow immediately when the maximum filling level in a tank has been reached.
The kit is composed of:
– high level probe, with two sensors for indication of maximum and stop level, with connection 3/4” BSP (M) and length 300 mm;
– warning light with horn, art. no. 8920;
– solenoid-actuated oil flow shut-off valve, with connection 1” BSP (M), art. no. 7365;
– electronic control switch;
– transformer / stabilizer 230 VAC – 24 VDC, art. no. 6528

Digital ultrasonic level indicator suitable for 208 l – drums

Art. 8753

Digital ultrasonic level indicator suitable for 208 l – drums. Easy to install and easy to read; it is inserted into a drum through its 3/4” – opening and is also fixed there. Automatic measurement: each 20 minutes it will check the level of the drum without showing values on display. When the level will reach a value between 20 and 10 l, the display will show a first warning alarm; under 10 l a second warning will be activated. Instantaneous measurement: if the level is between 145 and 20 l the exact quantity of product is shown.
Feeding by AAA alcaline battery.

Mechanical level gauge with floater and analogical measuring scale

Art. 8752

Mechanical level gauge with floater and analogical measuring scale, suitable for 60 and 208 l – drums. Easy to install and easy to read; it is inserted into a drum through its 3/4” – opening and is also fixed there. On demand also available with measuring scale in gallons.

Timer (daily/weekly) for the preset activation of solenoid valve art. no. 7360

Art. 7340

Timer (daily/weekly) for the preset activation of solenoid valve art. no. 7360.

Art. 7360

Solenoid-actuated security valve, 24 VDC, connections 1/2” BSP, for the shut-off of the compressed air supply. If the valve is installed into the compressed air circuit, the compressed air from the air pipe is discharged at the end of the labor time. This can be done by hand or also automatically if the valve is connected with the timer, art. no. 7340. Electric power supply through transformers / stabilizers art. nos. 6528 or 6529.