Swivel Joint and Hose Connection Component

Wide range of Swivel joint for Hose Reels and Hose Connection Component.

Art. 9951 – 9952 – 9953

90° – high pressure swivel joints in galvanized steel for the use with painted hose reel models for hoses up to 1/2”.
Art. 9951 Recommended for usual pressure applications with grease or oils (this is the standard swivel joint mounted on all painted steel hose reels for the use with grease up to 1/2”).
Art. 9952 Recommended for applications with mineral oils and compressed air (this is the standard swivel joint mounted on all painted steel hose reels for the use with oils up to 1/2”).
Art. 9953 Recommended for applications with glycol and brake fluid.

Art. 9969 – 9979

90° – high pressure swivel joints in galvanized steel for the use with painted steel hose reel models for hoses up to 1”. Recommended for high pressure applications with fluid lubricants.

Art. 6697

High pressure swivel joint, 90° – type, in galvanized steel, with ball valve, self-lubricating.

Art. 2107

Straight low pressure swivel joints in brass / free cutting steel. Recommended for applications with oils, diesel and compressed air.

Art. 9955 – 9961 – 9962 – 9963 – 9964 – 9966 – 9967

90° – high pressure swivel joints in stainless steel for the use with hose reel models for hoses up to 1/2”. Recommended for applications with water, AdBlue®/DEF/AUS32, glycol, other fluids compatible with this type of steel and compressed air. The standard swivel joint mounted on all stainless steel hose reels in 1/2” is Art. no. 9963.

Art. 9986 – 9987 – 9981

90° – high pressure swivel joints in stainless steel for the use with hose reel models for hoses up to 1”. Recommended for applications with water, AdBlue®/DEF/AUS32, glycol, other fluids compatible with this type of steel and compressed air. The standard swivel joint mounted on all stainless steel hose reels in 1” is Art. no. 9986.

Art. 9988 – 9989

Interchangeable fluid shaft suitable for installation in hose reel series EVO in 1/2”. They are available in galvanized and stainless steel AISI 304. In combination with the swivel joints of they enable the use of a painted steel hose reel model also for fluids that require wetted parts in stainless steel (f. ex. water, AdBlue®/DEF/AUS32), just by changing the components which are in contact with the fluid.

Art. 9982 – 9983

Low pressure swivel joints, suitable for hose reels in 1’ 1/4” and 1’ 1/2”, with fixed fluid shaft and swivelling support, gooseneck assembly and hose tail connections ø 33 mm and ø 38 mm.

Art. 9991 – 9992 – 9993 – 9994

Hose connection adapters with fluid shaft suitable for installation in hose reel series EVO in 1”; this special component facilitates the connection of the hose and assures a more eff ective fluid supply. They are available in galvanized and stainless steel AISI 304. In combination with the swivel joints they enable the use of a painted steel hose reel model also for fluids that require wetted parts in stainless steel (f. ex. water, AdBlue®/DEF/AUS32), just by changing the components which are in contact with the fluid.

ATTENTION: for a better choice, please contact our technical department specifying the diameter of the hose reel.

Art. 9947 – 9948 – 9949 – 9996 – 9997

Gooseneck assemblies with fluid shaft suitable for installation in hose reel series EVO in 1”; this special component facilitates the connection of the hose and assures a more eff ective fluid supply. They are available in galvanized and stainless steel AISI 304. In combination with the swivel joints they enable the use of a painted steel hose reel model also for fluids that require wetted parts in stainless steel (f. ex. water, AdBlue®/ DEF/AUS32), just by changing the components which are in contact with the fl uid.