Electronic and Mechanical Oil Flow Meters

Electronic device developed for the metering of fluids, particularly in applications where an immediate control of the supplied fluid is required. The function is based upon the oval gears measuring system combined with a probe that is measuring electromagnetic pulses monitored by an electronic component which indicates the quantity of each individual fluid dispense (single operation), the quantity of a sum of dispenses (partial totalizer) and the total of all dispenses ever made (absolute totalizer).
The Flexbimec flow meters are high quality measuring devices for the quantity control of lubricant dispenses. In all model series, “Oil Gate”, “Oil Bit Plus” and “Oil HFlow” it is possible to display 3 diff erent totals which show the quantities of the carried out fluid dispenses in the desired mode. In the series “Oil DT” simultaneously 2 different totals (single operation and absolute total) are visible on the display.

2545mid contalitri digitale per olio

The European Directive 2014/32/EU, better known as Directive MID (Measuring Instruments Directive), is a community norm responding to reasons of public interest, safety and order, environment protection as well as preventing consumer from false measurement, of levying taxes and duties and of fair trading. All these application, which directly and indirectly affect the daily life of citizens in many ways, may require certified measuring systems subject to legal verification.

MID-Oil Counter – Art. 2545

Electronic oval gears flow meter for oil, approved for legal transactions according to MID MI-005, Directive 2014/32/EU, with control gun, rubber protection guard, trigger guard, oil flow control pipe with sight glass, flexible rubber outlet, Ø 1/2”, with curved rigid 90° stem, automatic anti-drip nozzle and inlet swivel 1/2” BSP (M).
This flow meter fully comply the requirements of the OIML R117-1 (Dynamic measuring systems for liquids other than water – Part 1: Metrological and technical requirements, edition 2007) and Welmec 7.2 software guide, May 2011.

Operating conditions for the use
Viscosity range of lubricantsautomotive lubricant oil
Flow range0,5 - 10 l/min
Min. measurable quantity0,5 l
Accuracy class0,5 (MID-005 - OIML R117-1
Operating temperature range+5°c +40°C
PWorking pressure range1-20 bar
Display resolution degree0,005 l
Mechanical environment categoryM1
Electromagnetic enviroment categoryE2
Checksum codecksum E57E
Protection classIP 64
Underlying CE directives2004/108/CE - 2006/95/CE
2626 contalitri digitale olio

Art. 2626

Electronic oval gears flow meter for oil, series “Oil DT”, with control gun, rigid outlet Ø 12 mm, automatic anti-drip nozzle and inlet swivel 1/2” BSP (M). The new series “Oil DT” features the following advantages compared to the previous series:
– Control gun (art. no. 2180) includes a trigger guard, allows an easier maintenance, offers the possibility of a gradual oil supply through the trigger, and permits to open the valve with a minimum effort;
– Flow meter with enlarged display, with simultaneous visibility of 2 different totals (single operation and absolute total);
– Possibility of changing the measuring unit (liters, quarts, pints, gallons);
– Improved accuracy and repeatability of the measurement;
– Pressure drop.

Art. 2630

Electronic oval gears flow meter for antifreeze, series “Oil DT”, with control gun, rigid outlet Ø 12 mm, automatic anti-drip nozzle and inlet swivel 1/2” BSP (M).

Art. 2629

Electronic oval gears flow meter for oil, series “Oil DT”, suitable for inline applications, connections 1/2” BSP.

Art. 2633

Electronic oval gears flow meter for oil, series “Oil DT”, with control gun, flexible rubber outlet, Ø 1/2”, with curved rigid 90° stem, automatic antidrip nozzle and inlet swivel 1/2” BSP (M).

Technical data
Art.2626 - 2629 - 2630 - 2633
ConnectionsM 1/2″ BSP
Flow range1-35 l/min
Operating temperature range+10°C / +50°C
Max working pressure80 bar (1200psi)
Accuracy+/-0.5%
Total max resettable9999 l
Total max non- resettable9999 l
Weight1,4 kg
2826 contalitri digitale olio

Art. 2826

Electronic oval gears flow meter for oil, series “Oil Bit Plus”, with control gun, rubber protection guard, trigger guard, rigid outlet Ø 12 mm, automatic anti-drip nozzle and inlet swivel 1/2” BSP (M). The flow meters of the “Oil Bit Plus” series off er the following additional advantages compared to those of the “Oil DT” series:
– Rubber protection guard for the meter included,
– Higher measurement accuracy due to three decimal digits.

Art. 2830

Electronic oval gears flow meter for antifreeze, series “Oil Bit Plus”, with control gun, rubber protection guard, trigger guard, rigid outlet Ø 12 mm, automatic anti-drip nozzle and inlet swivel 1/2” BSP (M).

Art. 2829

Electronic oval gears flow meter for oil, series “Oil Bit Plus”, suitable for inline applications, connections 1/2” BSP.

Art. 2831

Electronic oval gears flow meter for oil, series “Oil Bit Plus”, with control gun, rubber protection guard, trigger guard, straight fl exible rubber outlet, Ø 1/2”, with manual anti-drip nozzle with screw regulation and inlet swivel 1/2” BSP (M).

Technical data
Art.2826 - 2829 - 2830 - 2831
ConnectionsM 1/2″ BSP
Flow range1-35 l/min
Operating temperature range+10°C / +50°C
Max working pressure80 bar (1200psi)
Accuracy+/-0.5%
Total max resettable9999 l
Total max non- resettable9999 l
Weight1,5 kg
2937 contalitri digitale olio

Art. 2937

Electronic oval gears preset flow meter for oil, series “Oil Gate”, with control gun, rubber protection guard, trigger guard, rigid outlet Ø 12 mm, automatic anti-drip nozzle and inlet swivel 1/2” BSP (M). The preset function is adding a small, but effective element of automation which permits the user to predetermine the desired dispensing quantity and to stop the flow automatically once the preset quantity has been reached. Re-calibration by the user is possible.

Art. 2942

Electronic oval gears preset flow meter for antifreeze, series “Oil Gate”, with control gun, rubber protection guard, trigger guard, rigid outlet Ø 12 mm, automatic anti-drip nozzle and inlet swivel 1/2” BSP (M).

2836 contalitri digitale olio

Art. 2836

Electronic oval gears preset flow meter for oil, series “Oil Gate”, with control gun, rubber protection guard, trigger guard, flexible rubber outlet, Ø 1/2”, with curved rigid 90° stem, automatic anti-drip nozzle and inlet swivel 1/2” BSP (M).

Technical data
Art.2836 - 2937 - 2942
ConnectionsM 1/2″ BSP
Flow range1-35 l/min
Operating temperature range+10°C / +50°C
Max working pressure80 bar (1200psi)
Accuracy+/-0.5%
Total max resettable9999 l
Total max non- resettable9999 l
Weight1,6 kg
Electronic oval gears high delivery flow meter for oil

Art. 2854

Electronic oval gears high delivery flow meter for oil, series “Oil HFlow”, with control gun 1” BSP, trigger guard, rigid outlet Ø 20 mm, automatic anti-drip nozzle and 1” BSP (M) inlet swivel. This high volume series allows to accelerate the oil supplies by the use of a flow meter that guarantees high accuracy measurement even at high flow rates.

2851 contalitri digitale Oil flow

Art. 2851

Electronic oval gears high delivery flow meter for oil, series “Oil HFlow”, suitable for inline applications, connections 1” BSP (F).

Art. 2852

Electronic oval gears high delivery flow meter for oil, series “Oil HFlow”, suitable for inline applications, connections 1’1/4” BSP (F).

Electronic oval gears high delivery flow meter for oil

Art. 2855

Electronic oval gears high delivery flow meter for oil, series “Oil HFlow”, with control gun 1” BSP, trigger guard, flexible rubber outlet Ø 3/4”, automatic anti-drip nozzle and 1” BSP (M) inlet swivel.

Technical data
Art.2851285428552852
Connections1″ BSP1′ 1/4″ BSP
Flow range (l/min)20-12020-8020-150
Operating temperature range+10°C / +50°C
Max working pressure75 bar (1125psi) 80 bar (1200psi)75 bar (1125psi)
Accuracy+/-0.5%
Total max resettable9999 l
Total max non- resettable999999 l9999 l999999 l
Weight1,6 kg3,9 kg3,9 kg1,8 kg

Art. 2710

Mechanical oval gears flow meter, with body in aluminium, for oil and antifreeze, with two totalizers

Art.ConnectionsMax flow (l/min)Operating temperature rangeMax working pressure (bar)AccuracyTotal max resettableTotal max non resettableWeight
2710F 1/2″ BSP15+10°C +50°C50+/- 0,5%999,9 l999999 l0,68 kg

Art. 2712

Mechanical oval gears flow meter, for oil and antifreeze, with control gun, rigid outlet, Ø 12 mm, automatic anti-drip nozzle and inlet swivel 1/2” BSP (M). Composed of art. nos. 2710 and 2105.

Art.ConnectionsMax flow (l/min)Operating temperature rangeMax working pressure (bar)AccuracyTotal max resettableTotal max non resettableWeight
2712M 1/2″ BSP15+10°C +50°C50+/- 0,5%999,9 l999999 l1,1 kg

Art. 2703

Mechanical, analogical flow meter for oil and antifreeze, with two totalizers, suitable for inline applications.

Art.ConnectionsMax flow (l/min)Operating temperature rangeMax working pressure (bar)AccuracyTotal max resettableTotal max non resettableWeight
2703F 1/2″ BSP15+10°C +50°C70+/- 0,5%0-10 l9999 l0,86 kg

Art. 2608

Mechanical, analogical flow meter for oil and antifreeze, with control gun, rigid outlet Ø 12 mm, automatic anti-drip nozzle and inlet swivel 1/2” BSP (M). Composed of art. nos. 2703 and 2105.

Art.ConnectionsMax flow (l/min)Operating temperature rangeMax working pressure (bar)AccuracyTotal max resettableTotal max non resettableWeight
2608F 1/2″ BSP15+10°C +50°C70+/- 0,5%0-10 l9999 l1,6 kg