Electric Oil Pumps

Portable pneumatic and electric pumps, suitable for the transfer of small fluid quantities.

Electric gear pump for an intermittent use, for the transfer of hydraulic low viscosity oil, antifreeze, diesel, water

Art. 6302 – 6303 – 6304 – 6305 – 6308 – 6309

Electric gear pump for an intermittent use, for the transfer of hydraulic low viscosity oil, antifreeze (A), diesel (D), water (W). Protection category IP55. Pump body in brass, gears in bronze and pump shaft in stainless steel. Electric cable and crocodile clamps not included.

Art.VoltageCurrent drainAllowed fluidsDeliveryOutlet pressureConnectionsWeightDimensions (LxWxH) (mm)
630212 Vcc6 AA-D-W15l/min2 bar F 3/8″ BSP
1,5 kg165x160x80
63035 AOlio1 l/min4 bar2,5 kg165x166x80
630424 Vcc3 AA-D-W15l/min2 bar1,5 kg165x160x80
630512 Vcc11 AOlio6 l/min4 bar4 kg180x230x83
630824 Vcc3 AOlio1 l/min4 bar2,5 kg165x166x80
63096 AOlio6 l/min4 bar4 kg180x230x83
Electric gear pump for an intermittent use, for the transfer of hydraulic low viscosity oil, antifreeze, diesel, water

Art. 6312 – 6314 – 6324 – 6326

Electric gear pump for an intermittent use, for the transfer of hydraulic low viscosity oil, antifreeze (A), diesel (D), water (W). Pump body in brass, gears in bronze and pump shaft in stainless steel. With metal cover, ON-/OFF switch and 1 m – cable with alligator clamps for battery connection. Protection category IP55.

Art.VoltageCurrent drainAllowed fluidsDeliveryOutlet pressureConnectionsWeightDimensions (LxWxH) (mm)
631212 Vcc6 AA-D-W15l/min2 bar F 3/8″ BSP
2,5 kg165x160x80
631411 AOlio6 l/min4 bar4,5 kg185x240x85
632424 Vcc3 AA-D-W15l/min2 bar2,5 kg165x160x80
63266 AOlio6 l/min4 bar4,5 kg185x240x85
Pneumatic rotary gear pump for the transfer of hydraulic low viscosity oil, antifreeze, diesel, water

Art. 6559 – 1058

Pneumatic rotary gear pump for the transfer of hydraulic low viscosity oil, antifreeze, diesel, water. Pump body in brass (art. no. 6559) or in stainless steel (art. no. 1058), gears in bronze, seals in Viton® and pump shaft in stainless steel.

Art.Compressed air supplyOutlet pressureDeliveryConnectionsWeightDimensions (LxWxH) (mm)
65594 bar4 bar10,5 l/minF 3/8″ BSP1,5 kg165x160x80
10584 bar4 bar10,5 l/minF 3/8″ BSP1,5 kg165x160x80
Electric gear pump, self-priming, protection category IP 55, for the supply of oil, antifreeze, diesel, water at medium pressure

Art. 6125 – 6122 – 6128

Electric gear pump, self-priming, protection category IP 55, for the supply of oil, antifreeze, diesel, water at medium pressure; guarantees a constant flow and a low noise level. Pump body in stainless steel, gears in bronze and pump shaft in stainless steel. Includes a bypass valve preset on 15 bar pressure and 1.5 m – electric cable with SCHUKO plug.

Art.VoltagePowerCurrent drainRpmOutlet pressureDelivery (l/min)ConnectionsWeight
6125110V-60Hz 0,55 kw
3,8 A
2760
15 bar
10,5
F 3/8″ BSP
7,5 KG
6122230V-50Hz
6128400V-50Hz
Electric, self-priming gear pump for the supply of oil, antifreeze, diesel, water at medium pressure

Art. 6141 – 6129

Electric, self-priming gear pump for the supply of oil, antifreeze, diesel, water at medium pressure; guarantees a constant flow and a low noise level. Pump body in stainless steel, gears in bronze and pump shaft in stainless steel.
Kit includes a bypass valve preset on 15 bar pressure, an inline oil filter, a manometer for outlet pressure control, a 1.5 m – electric cable with SCHUKO plug and an electronic pressure switch that starts the pump once the control gun is activated and stops it again due to the pressure increase in the circuit once the gun is closed. Protection category IP 55.

Art.VoltagePowerCurrent drainRpmOutlet pressureDelivery (l/min)ConnectionsWeight
6125230V-50Hz 0,55 kw 3,8 A 2760 15 bar 10,5 F 3/8″ BSP 11,5 KG
6122400V-50Hz
Electric, self-priming gear pump for the supply of oil

Art. 6124

Electric, self-priming gear pump for the supply of oil, approved according to the requirements of OIML R117-1 (DIN 19217). Consisting of:
– electric, self-priming 230 VAC gear pump, art. no. 6122;
– automatic air separator kit, art. no. 2054, suitable to separate the air eventually present in the suction line from the oil, with automatic pump stop device, approved according to OIML R117-1; includes also manometer for the control of the outlet pressure and non-return valve;
– control box with push button and electric connection cable;
– double electronic pressure switch that starts the pump once the control gun is activated and stops it again due to the pressure increase in the circuit once the gun is closed;
– bypass valve preset on 15 bar pressure;
– 1.5 m – electric cable with SCHUKO plug.
Protection category IP 55.

Art.VoltagePowerCurrent drainRpmOutlet pressureDelivery (l/min)ConnectionsWeight
6124230V-50Hz0,55 kw3,8 A27601015 barF 1/2″ BSP13 KG
6135 Electric, self-priming gear pump, for the supply of oil

Art. 6133 – 6135 – 6138 – 6145 – 6149

Electric, self-priming gear pump, for the supply of oil under demanding conditions at medium pressure and with long pumping distances; guarantees a constant flow and delivery, even after long pumping distances or with simultaneous supplies. Available with motors in 230 Vac, 400 Vac and 110 Vac. Includes a bypass valve preset on 28 bar pressure. Electric cable with plug not included.

Art.VoltagePowerCurrent drainRpmOutlet pressureDelivery (l/min)Connections IN-OUTWeight
6124110V - 60Hz 1,5 kw
9,6 A 1400
28 bar
34
M 1″ BSP - M 1″ BSP
28 kg
6135230V - 50Hz
6138400V - 50Hz9 A30 kg
6145230V - 50Hz 2,2 kw12,5 A2760 53
6149400V - 50Hz10 A32 kg
6136 Pompa elettrica per olio

Art. 6136

Electric gear pump, art. no. 6135, equipped with kit art.no. 7373 consisting of pressure accumulator, inline oil filter, non-return valve, manometer, connection adapters and an electronic pressure switch that starts the pump once the control gun is activated and stops it again due to the pressure increase in the circuit once the gun is closed.

The pressure accumulator guarantees a constant oil flow by avoiding continuous starts and stops of the motor that could cause damages in case of dispensing small quantities.
Includes a bypass valve preset on 28 bar pressure. Electric cable with plug not included.

Art.VoltagePowerCurrent drainRpmOutlet pressureDelivery (l/min)Connections IN-OUTWeight
6136230V - 50Hz1,5 kw9,6 A140028 bar34M 1″ BSP - M 3/4″ BSP33 kg
Encased oil supply kit

Art. 3049

Encased oil supply kit, composed of: electric gear pump, art. no. 6136, metal and lockable cover, art. no. 7376, and safety switch of protection category IP 55, art. no. 7370, with 3 m – cable and plug.

Art. 3050

Encased oil supply kit, such as art. no. 3049, but including electric gear pump, art. no. 6145, with delivery 53 l/min. Ideal for pipework installations.

Art.VoltagePowerCurrent drainRpmOutlet pressureDelivery (l/min)Connections IN-OUTWeight
3049230V - 50Hz1,5 kw9,6 A140028 bar34M 1″ BSP - M 1″ BSP37 kg
30502,2 KW12,5 a27605339 KG