Diesel Dispensing Nozzles and Accessories

Manual diesel dispensing nozzle

Art. 6700

Manual diesel dispensing nozzle, body in aluminium, with plastic hose tail ø 25 mm and dispensing outlet with ø ext. 25 mm, with latch for locking of trigger. Max flow rate 80 l/min. The nozzle can also be used for the dispensing of oils with a max. pressure of 3.5 bar.
Art. 6701 Same as art. no. 6700, but with inlet swivel 1” BSP (M-F)

Automatic diesel dispensing nozzle

Art. 6725

Automatic diesel dispensing nozzle, body in aluminium with rubber protection, with inlet swivel 1” BSP (M–F) and dispensing outlet with ø ext. 24 mm. Max flow rate 60 l/min.
Art. 6726 Automatic diesel dispensing nozzle, body in aluminium with rubber protection, with inlet swivel 1” BSP (M–F) and dispensing outlet with ø ext. 29 mm. Max flow rate 120 l/min.

Automatic diesel dispensing nozzle

Art. 6721

Automatic diesel dispensing nozzle, high delivery version, body in aluminium, with inlet swivel 1’ 1/2” BSP (M–F) and dispensing outlet with ø ext. 39 mm, with latch for locking of trigger. Max flow rate 280 l/min.

Inlet Swivel

Inlet Swivel

Art. 2107/34 Inlet swivel 3/4” BSP (M) – 1” BSP (F).
Art. 2107/10 Inlet swivel 1” BSP (M) – 1” BSP (F).
Art. 2107/35 Inlet swivel 3/4” BSP (M) – 1” BSP (M).
Art. 2107/36 Inlet swivel 1” BSP (M) – 1” BSP (M).
Art. 2107/33 Inlet swivel 3/4” BSP (M) – 3/4” BSP (M).

art 6618 flexbimec

Art. 6618

GET FUEL – magnetic safety and ventilation valve for the installation on top of tanks or other fuel containers. Connection: 2” BSP . This valve permits to reduce considerably the release of gases and smells of fuels in residential areas and also the eventual contamination of fuels caused by condensation water or rainwater entering into the tank. The valve is composed by two magnetic discs that are working automatically both in a situation of pressurization (charging) and depressurization (discharging) of a tank.

art 6439-2p flexbimec

Art. 6439/2P

Suction hose assembly for diesel pumps and transfer kits, composed of blue PVC – hose, length 2 m, ø int. 25 mm, with 2 suitable hose tails with connection 1” BSP (M), 2 suitable hose clamps and suction non-return foot valve, body in brass, with filter in stainless steel, connection 1” BSP (F).